Thanks to its mineral-based structure, MINEPOR is an A1 class non-combustible heat insulation material that provides fire safety. With 0.05 W/mK thermal conductivity value, MINEPOR is a durable insulation system used in old and new buildings with superior insulation performance. MINEPOR adds value to any building, old or new, being durable, non-combustible, light, and providing heat insulation and energy conservation. Thanks to its raw material that is not externally dependent and which does not damage the environment, it is preferred for sustainable buildings. With boron and other components, it displays perfect pore structure and high bearing capacity. Click to view product analysis reports for MINEPOR, which is TSEK-certified and manufactured in accordance with TSEK 119 criteria document.
TSEK-certified AKG Minepor
was selected as "Thermal Insulation Product of the Year"
by the readers of Yalıtım Journal in 2013.
New-generation insulating board Minepor
has been certified with TSEK quality certificate
and A1 class non-combustible product report.
With 0.05 W/mK thermal conductivity coefficient,
Minepor ensures insulation and improves energy efficiency of buildings.
It builds comfortable living spaces with superior insulation performance.
It is an A1 Class non-combustible material.
It emits no toxic gases or smoke during fire.
Its structure does not deteriorate after fire.
It prevents fire from proceeding along the facade,
and saves lives by improving the fire safety of buildings.
With multiple uses, it offers solutions
for the insulation of facades, roofs, terraces and
car park ceilings of buildings with different characteristics (Residences, Shopping Malls, schools, etc.).
It is in harmony with the architectural aesthetics of the building, and does not restrain movement on the facade.
Minepor is an utterly light and durable
new-generation product developed through
long-term R&D studies, having many small and
homogeneous pores thanks to its special technology.
It protects the thermal performance of the building throughout its life.
It is an inorganic and mineral-based building material
which does not contain bacteria or microorganisms.
It does not wear out in time due to external conditions,
and is not affected by sunlight.
With a structure that can be cut with a utility knife,
it provides speed to applications. Thanks to its high workability, it can be used by any
team capable of bricking and plastering..
Thanks to its diffusion property and structure which is
able to naturally discharge moisture, it builds healthy living spaces with fresh air.
Thanks to the homogeneous structure composed of boron mineral and other components,
it is impact-proof.
Further, it does not rupture from the facade due to wind vacuum loads.
It forms monolithic and smooth facades in all areas of application.
Therefore, it prevents excessive plaster consumption. Preventing
heat losses on concrete surfaces, it saves
Thanks to its insulation power, it decreases carbon emission.
It does not contain radioactive and petroleum-derived materials.
It is preferred in Green Building projects with its environment-friendly properties.
• Add 7.5-8 liters of water to 25 kg packages.
• Apply the adhesive in such a way to cover the entire surface of the insulation plate by means of a notched trowel with notches of 10 cm.
• Gaps/burrs on the concrete surfaces must be cleaned and smoothed before the application.
• Cover at least 75% of the total surface with the adhesive.
• Depending on weather conditions, it must be consumed within 1.5 hours after mixing with water.