Application to concrete surfaces:

AAC wall blocks are bricked as effused from the concrete flooring. Concrete surfaces such as Columns, Beams or Partitions are covered with Minepor. By doing this, monolithic, mineral-based, non-combustible, isolated facades are obtained.


Minepor is applied with a special adhesive.
The adhesive can be easily prepared under
the conditions specified on its package.
Deburr the concrete surfaces and make them ready for application.

By means of a notched trowel, apply
the special adhesive prepared in the previous
step on the Minepor surface homogeneously.

Apply the Minepor with adhesive
to concrete surfaces. After application, level
the surface by sandpapering it.

One day after, fix Minepor on
concrete surfaces with steel
screw plugs by means of a drill.

Place a net on the Minepor fixed by plugs.
Apply first layer application plaster
with the special adhesive of Minepor.

Apply finish plaster. Conclude
the application and
make it ready for painting.

Application to ceiling surfaces:

Being a non-combustible isolation material, Minepor is used on the ceilings of car parks and garages, terraces and between roofs.

Prepare the special adhesive of
Minepor in the same way as concrete
surfaces and apply it on Minepor surface by means of a trowel.

Stick Minepor on the surface
to be isolated by applying hand
pressure on it. Adhesion will occur quickly.